HVAC Service Training Southern California
Tuition: The tuition for each class is $20.00. Tuition is due at time of registration via check, money order or credit card. Companies with an active line of credit may submit a purchase order.
Class Locations: Held at USACD branch locations.
RSVP’s and Cancellations: Please pre-register for seminars. RSVP’s can be done by completing a registration form and submitting by email. RSVP’s and cancellations must be made 48 hours in advance. Student substitutions are always welcome if the registrant is unable to attend. Late cancellations and no shows will be billed for the class.
Class is limited to 25 people. Class minimum is 10 and will be cancelled if there is not enough interest.
Miscellaneous: A light meal is included prior to start of class. Most classes qualify for 3 hours of NATE continuing education credit. Classes are subject to a minimum enrollment and to change without notice. Instructor is an US Air Conditioning Distributor employee in the Customer Assurance Department.
Questions: Please contact your Territory Manager or Marie Rohde m.rohde@us-ac.com or 626-854-6833.
No Classes will be scheduled during June, July, and August.
Fall and Winter Schedules will be Posted in August.
Class will cover the new equipment coming out and requirements for the SEER 2 requirements. Changes on installation, and service. It will also cover the upcoming changes in refrigerants, codes and training needed to certify for them. This class is good for salespeople, owners, office managers, and installation service technicians. Instructors are Matthew Getz and Bruce Chaney from Anchors Away LLC. class hours are 5:00 -9:00 pm.
02/09/23 San Diego – 5:00 PM – 9:00 PM
02/15/23 Escondido – 5:00 PM – 9:00 PM
02/16/23 Temecula – 5:00 PM – 9:00 PM
02/21/23 El Cajon – 5:00 PM – 9:00 PM
Learn the Simplicity SSE programing structure and startup procedure that is not only needed but required for all York commercial equipment 3 to 60 ton. Learn how to set up the Simplicity SSE Control for various applications as well as how to copy the configuration settings from one unit to another using a USB thumb drive and updating firmware if required. This class will also cover the programing of the Delta VFD’s that are currently used on the equipment. Handouts to include Simplicity SE parameter quick guides and alarm discretion and troubleshooting manuals. Instructor is Craig Walker; class hours are 5:00-9:00 pm.
03/09/23 San Diego – 5:00 PM – 9:00 PM
03/15/23 Escondido – 5:00 PM – 9:00 PM
03/16/23 Temecula – 5:00 PM – 9:00 PM
03/21/23 El Cajon – 5:00 PM – 9:00 PM
03/27/23 El Centro – 12:00 PM – 5:00 PM
This class will cover the changes in the Venstar family of thermostats, zone boards, dampers, and accessories.
Set up and troubleshooting with Wi-Fi and Skyport.
Tips and tricks to help make it easier on the tech and installer. This class is good for salespeople, technicians, and installers, Instructor is Matthew Getz; class hours are 5:30-9:00 pm.
04/13/23 San Diego – 5:30 PM – 9:00 PM
04/19/23 Escondido – 5:30 PM – 9:00 PM
04/20/23 Temecula – 5:30 PM – 9:00 PM
04/25/23 El Cajon – 5:30 PM – 9:00 PM
Class will cover the advanced servicer and troubleshooting of both heart pumps and air conditioners. Control wiring, line sets, charging and diagnostics. Proper tools and how to use them. advanced issues and updates. HVAC equipment supplier will be represented. This class is good for service technicians, service managers, installers.
NATE approved 3 CEH’s, course #8555-0015. CEH’s apply to ACIN, HPIN, ACSV, HPSV. Instructor is Matthew Getz. class hours are 5:30 -9:00 pm.
05/11/23 San Diego – 5:30 PM – 9:00 PM
05/17/23 Escondido – 5:30 PM – 9:00 PM
05/18/23 Temecula- 5:30 PM – 9:00 PM
05/23/23 El Cajon – 5:30 PM – 9:00 PM